|To:||firstname.lastname@example.org, RFlabnotes@aol.com, email@example.com|
|Subject:||[Amps] 811 Plate Color/other tube color/Damage|
|From:||"Pat Barthelow" <firstname.lastname@example.org>|
|Date:||Mon, 03 Nov 2003 16:51:04 -0800|
*** The problem is not with the 811A grids, it's melting holes in the 811A plates/anodes due to the increased velocity of electrons because Collins Radio used more than the rated anode V.
There's a great picture of a pair of 4-400As producing lots of power (modulators) at:
Can you guys give an opinion as to whether these 4-400As or other tubes with this plate color are within their long life operating range? In other words, are these in the picture dissapating about 400 watts each? And if 811A plates were the same color, would they be exceeding their dissapation ratings?
Tnx Pat email@example.com
Is your computer infected with a virus? Find out with a FREE computer virus scan from McAfee. Take the FreeScan now! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[Amps] SB220, ZL2AAA|
|Next by Date:||Re: [Amps] Water cooling heat exchanger approaches, Ian White, G3SEK|
|Previous by Thread:||[Amps] SB220, ZL2AAA|
|Next by Thread:||[Amps] Re: 811 Plate Color/other tube color/Damage, rlm|
|Indexes:||[Date] [Thread] [Top] [All Lists]|