Amps
[Top] [All Lists]

Re: [Amps] Fw: airspaced C's

To: "ON5KM" <on5km@planetinternet.be>, <Amps@contesting.com>
Subject: Re: [Amps] Fw: airspaced C's
From: Karl-Arne Markström <sm0aom@telia.com>
Reply-to: Karl-Arne Markström <sm0aom@telia.com>
Date: Tue, 23 Dec 2003 18:50:20 +0100
List-post: <mailto:amps@contesting.com>
Hello,

A conservative estimate is 1200 V peak per mm plate spacing.

It is however dependent on the finish of the capacitor plates,
and if the edges are properly rounded.

73 and Season's Greetings/

Karl-Arne
SM0AOM

----- Original Message ----- 
From: "ON5KM" <on5km@planetinternet.be>
To: <Amps@contesting.com>
Sent: Tuesday, December 23, 2003 6:28 PM
Subject: [Amps] Fw: airspaced C's


> 
> 
> Hi ,
> is it possible to see on the spacing between the plates in an air spaced 
> variable C howmuch the maximum usable voltage is ???? 
> 
> tnx 73 de ON5KM Stef
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>