** Do you mean a grid-filament short? Do you see springs floating
around in the bottom of the glass envelope?
>One had a short to ground.
>Other two are OK, but replaced all 3 with extras I had.
>
>Raymond H. McClure - W8CNL
>5 McKenzie Circle
>North Augusta, S.C.
>29841-4319
>
>
>----- Original Message -----
>From: "R. Measures" <r@somis.org>
>To: "Ray" <w8cnl@mindspring.com>; "AMPS" <amps@contesting.com>
>Sent: Wednesday, December 31, 2003 6:49 PM
>Subject: Re: [Amps] AL-811
>
>
>>
>>
>> >Had a tube short.
>> >Also took out part # 104-0150, 1.5 ohm resistor.
>> > # 104-0060, .6 ohm resistor.
>> > # 200-1100-7, .001 uf, 7.5 KVA cap.
>> > # 300-4007, 1N4007 diode.
>> >
>> >Replaced all three tubes and the above parts.
>> >
>> ** WHAT WAS WRONG WITH THE 3, ORIGINAL TUBES?
>>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|