Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Step start resistors

from [Ian White, G3SEK] [Permanent Link][Original]
To: amps@contesting.com
Subject: Re: [Amps] Step start resistors
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
Reply-to: "Ian White, G3SEK" <g3sek@ifwtech.co.uk>
Date: Mon, 5 Jan 2004 21:51:41 +0000
List-post: <mailto:amps@contesting.com>
K7RDX wrote:
Most ops here in the good ol USA don`t have a problem with house lights diming when powering up our amps....

Sorry, I didn't mean serious dimming, you might only see a slight flicker.


We usually run the psu from a dedicated 240vac line...

So do we in Europe - we don't play with "half voltage" :-)


--
73 from Ian G3SEK         'In Practice' columnist for RadCom (RSGB)
                           Editor, 'The VHF/UHF DX Book'
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Step start resistors, another solution, Paul Christensen, Esq.
Next by Date:  Re: [Amps] Step start resistors, another solution, Alek Petkovic
Previous by Thread:  RE: [Amps] Step start resistors, another solution, PAUL HEWITT
Next by Thread:  Re: [Amps] Step start resistors, K7RDX
Indexes:  [Date] [Thread] [Top] [All Lists]