A very simple solution is to use a decent antenna tuner in between the
exciter and the amplifier!
On Tue, 16 Mar 2004 17:52:15 -0600 "Larry" <firstname.lastname@example.org>
> Hi guys, I recently recieved a home brew 4-1000a amplifier. Amp is
> tapped for 160 only and running just 1 tube. High voltage is near
> 5000. This amp has no tuned input circuit and Im not a very good
> builder. Does anyone have a schematic or know where I can get a
> tuned circuit for this one band amp? My Yaesu tunes to abt 1.6 swr
> on auto tuner and antenna standing wave is less than 1.5.
> I have read enough here to know thats there is some sharp fellows on
> the list.
> thanks Larry WB9F
> Amps mailing list
Amps mailing list