To: | amps@contesting.com |
---|---|
Subject: | [Amps] drake l4 PS questions |
From: | "Partain, Chuck" <Chuck_Partain@maxtor.com> |
Date: | Mon, 3 May 2004 06:46:16 -0600 |
List-post: | <mailto:amps@contesting.com> |
A friend of mine asked me to look at his Drake L4 power supply. I see a resistor, 5k 10w burned and a few wires scorched. Reading and looking at the schematic this is supposed to go if any of the diodes short in the rectifier section. I'll replace the resistor and was thinking of "upgrading" the diodes. Then plug it in and look for any other items of concern. Any thought/comments? ka1mwp _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] cooling a high power rf mosfet amp??, jeff millar |
---|---|
Next by Date: | Fw: [Amps] Looking for tube sockets, on4kj |
Previous by Thread: | [Amps] cooling a high power rf mosfet amp??, Dan Sawyer |
Next by Thread: | [Amps] power vacuum tube hi-pot and "conditioning", Traian |
Indexes: | [Date] [Thread] [Top] [All Lists] |