Dan Sawyer wrote:
If the drive is turned down sufficiently to prevent gross
overdriving the 'average' drive seems to be too low to be effective.
How do you know the 'average drive is too low'? If you are looking at a
non-peak reading wattmeter, output will look very low even when you have
1500w PEP. You need to use a scope or a true PEP wattmeter.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|