[Amps] Ref: Filament Transformer (David C. Hallam)

[Will Matney <craxd1@ezwv.com>]

David,
Not one thing wrong with it. You'll have 5 Vac at 42 amps from both so they 
wont starve a bit!

Will Matney

"I am building a linear using a 4CX1500A that needs about 38 amps at 5 volts for the filament.I have two identical 5V 21A filament transformers.Is there any reason why I can't wire the two in parallel to get the required amperage the filament? I would put a current inrush limiter for a soft start."

David C. Hallam KC2JD

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps