Richard,
Thanks for the offer don't need one.
Just putting together some information to give away
so to keep costs down I have to find someone willing to help me.
I have a friend that has one but doesn't have a PC and I live too far away.
I was hoping with all the ones that have be converted to other
tubes there would be some of the pcb's laying around.
I may have to look for a basket case one to get what I need..
Bennie
How about a complete amplifier? I have one if you are interested it is the
"B" model. It has been fired up appears to have everything that it needs
to work but I never have put RF to it. It can be yours for $200.00 plus
shipping.
K6KWQ Dick "12 Volt radios are for wimps, real radios can kill you" Still
can't make it go QRO with "More Power"
----- Original Message -----
From: <mailto:bbolin@yadtel.net>bb
To: <mailto:amps@contesting.com>amps@contesting.com
Sent: Saturday, September 18, 2004 1:45 PM
Subject: [Amps] Dentron GLA1000B
I am looking for someone that has the following GLA1000 pcb's removed
and would scan the copper side for me.
Power supply pcb, Tube pcb, Tune input pcb.
Scan at 300 or 600dpi full 16m color.
Thank You
Bennie
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|