Trian,
Yea, it's a 2 meter amp. I don't like what he done on the tune and load
capacitors. I think that amp will have problems arcing. There should
have been a full sheet of Teflon plastic across each plate instead of
those little spacers on the ends (my opinion). This tube is hard to
mount due to the fact it has the coaxial ring connections all on the
same plane. Easily made copper clamps cant be used here, and finger
stock is about the only method to use like he's done. If one set down
and studied this though, a different solution might be found.
Will Matney
Traian wrote:
Hi all,
Pictures from a VHF amp using the GU43B tetrode:
http://www.ok1kvk.net/pa_gu43b.htm
I like the HM socket, the way how the use of a hard to find socket was
avoided.
May this to be a 2m amp, as I think?!
73,
Traian
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
__________ NOD32 1.880 (20040928) Information __________
This message was checked by NOD32 antivirus system.
http://www.nod32.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|