Amps
[Top] [All Lists]

Re: [Amps] 3-400 tubes needed for l4

To: "Partain, Chuck" <Chuck_Partain@Maxtor.com>
Subject: Re: [Amps] 3-400 tubes needed for l4
From: R.Measures <r@somis.org>
Date: Fri, 3 Dec 2004 04:45:01 -0800
List-post: <mailto:amps@contesting.com>
** Floaters are manufacturing debris that normally cause no problems -- except in a zero-G environment.
If a tube has less than 10uA of anode-grid leakage at 2x its rated max anode supply V, it is probably good.


On Dec 3, 2004, at 4:09 AM, Partain, Chuck wrote:

yea the amp got delivered ROUGHLY with the tubes in it. one has "floaters"


so he is going to replace both of them.

** Does he want to sell the old tubes?



-----Original Message----- From: R. Measures [mailto:r@somis.org] Sent: Thursday, December 02, 2004 5:27 PM To: Partain, Chuck Subject: Re: [Amps] 3-400 tubes needed for l4



On Dec 2, 2004, at 11:46 AM, Partain, Chuck wrote:


I am in the market for 2 GOOD tubes for an L4. 3-400 are whats in there.

Are you sure that the ones in there are kaput?

(belongs to a friend)


  Dunno what he is willing to pay but I searched on the web/ebay for a
while and havn't seen any,
if you know where or someone who is willing to part with a good pair,
mail me.

thanks.


KA1MWP, Chuck



_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps



Richard L. Measures, AG6K, 805.386.3734. www.somis.org





Richard L. Measures, AG6K, 805.386.3734. www.somis.org


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>