This is what I get for not keeping up with emails. Sorry for the duplicate
answer...
Joe, N3JI
"R.Measures" <r@somis.org> wrote:
They are in series since they have only one wire in common. If they
had two wires in common, they would be in parallel. However the
CT-return allows one filament to light if the other filament is open or
if the other tube is removed. cheerz, Gene
On Jan 2, 2005, at 8:21 AM, Gene Bigham wrote:
> Well now, let's look more carefully here. Filament transformer is
> center
> tapped, where does the CT go? In the middle of the two tube filaments
> is a
> choke labeled L11 which goes to #4 on a connector and a R1 which can be
> shorted out by relay contact on RY1. Then in series is a parallel D1
> R2 and
> c36 to a f1(fuse) which connects to #5 on a connector. Son of a gun
> connector point #4 goes to center tap on the filament transformer.
> Thanks
> Rich, guess the filaments are not series after all!
>
> ----- Original Message -----
> From: "R. Measures"
> To: "Gene Bigham"
> Cc:
> Sent: Sunday, January 02, 2005 9:21 AM
> Subject: Re: [Amps] Henry 2K
>
>
>>
>> On Jan 2, 2005, at 5:45 AM, Gene Bigham wrote:
>>
>>> I own a 2K Classic X and a quick check of my schematic shows the
>>> filaments are series, if one is out, both will be out.
>>> Gene KB0GU
>> Is there a RFC between the filaments' mid-point and the neg. HV /
>> filament xfmr CT?
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>
>> Richard L. Measures, AG6K, 805.386.3734. www.somis.org
>>
>
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---------------------------------
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|