Amps
[Top] [All Lists]

Re: [Amps] Solid state amps

To: "Dan K9ZF" <n9rla@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] Solid state amps
From: "DF3KV" <df3kv@aol.com>
Reply-to: DF3KV <df3kv@aol.com>
Date: Fri, 7 Jan 2005 23:21:14 +0100
List-post: <mailto:amps@contesting.com>
----- Original Message -----
From: "Dan K9ZF" <n9rla@yahoo.com>
To: <amps@contesting.com>
Sent: Friday, January 07, 2005 10:50 PM
Subject: Re: [Amps] Solid state amps


> Is it just me, or is building solid state amps 'cost prohibitive'?
>
> Mechanically, it would seem a lot easier to build solid state, but
the
> power fets just seem way too expensive.  For example, I  just read
the
> article Win posted.  So I looked up the price of MRF 154's.....$485
> each!  Add in some stuff like heat sinks and an arc welder size
power
> supply................
>
> Maybe I'm just cheap:-)

you do not need expensive mosfets for a linear and a big power supply,
Overhere linears with about 30-40 cheap hexfets IRF-820 etc are quite
popular,
supplied by a transformerless switching supply.
For 1,5 KW you need 50 of them

73
Peter

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>