To: | "'Martin J. Morgenbesser'" <W7MJM@arrl.net>, amps@contesting.com |
---|---|
Subject: | RE: [BULK] - [Amps] IC-718 and AL-811: Icom manual misleading, interface necessary according to Icom technician |
From: | Steve Katz <stevek@jmr.com> |
Date: | Fri, 4 Feb 2005 10:54:19 -0800 |
List-post: | <mailto:amps@contesting.com> |
When I asked how such damage could occur, given the specs in the manual, the Icom technician told me that the specs as printed in the manual are misleading and that the IC-718 send relay can only handle "16 volts OR 2 amps, not both." ::Did you ask him where the 2 amps would come from, if there are no volts? Maybe Icom's figured a way to make current flow without any potential, that would be really cool. I could convert my car to run on a zero volt battery, as long as it can deliver 1000 amps, I'd be all set. -WB2WIK/6 _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] IC-718 and AL-811: Icom manual misleading,interface necessary according to Icom technician, Martin J. Morgenbesser |
---|---|
Next by Date: | Re: [Amps] IC-718 and AL-811: Icom manual misleading,interface necessary according to Icom technician, Will Matney |
Previous by Thread: | [Amps] IC-718 and AL-811: Icom manual misleading,interface necessary according to Icom technician, Martin J. Morgenbesser |
Next by Thread: | RE : [BULK] - [Amps] IC-718 and AL-811: Icom manual misleading,interface necessary according to Icom technician, hermans |
Indexes: | [Date] [Thread] [Top] [All Lists] |