How about a wall light dimmer triac into a rectifier? I have used one to
manually bring up the filament on a home built linear. 73, Dan, N5AR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Will Matney
Sent: Monday, March 07, 2005 11:06 AM
To: amps@contesting.com
Subject: [Amps] 90V Var Reg.
Hopefilly, somebody here, I'm pretty sure, may have already done this so I
dont have to re-invent the wheel. What I need is a good, cheap, simple
circuit for a variable 0 to +90 Vdc supply. Originally, I was going to just
use a variac, and a rectifier to control a 3 amp DC P.M. motor load. The
motor is a 90 VDC though so it needs knocked down if ran off the line. I
know I could use a zener-transistor, etc but was hoping somebody may have
already done this. It would save me an evening of doing the layout. If so,
and you have a link to a circuit, please e-mail me about it. Thanks all in
advance.
Best,
Will
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|