Daniel,
It might handle them on SSB only, no CW or AM. Also, I would think the tank
would have to be matched to the tubes, not sure because the plate resistance
will change.
Will
*********** REPLY SEPARATOR ***********
On 3/30/05 at 3:00 PM Daniel Hileman wrote:
>Hi Everyone,
>Thanks for all the input about the MLA-2500 and the 811h, I think I'm
>gonna
>go with the 811H. Here's another question to which I THINK I know the
>answer. Will putting 572B tubes (and Maybe a bigger cooling fan) in my
>811H
>allow for more output (kinda like the Al-572) or will it just be easier
>on
>the amp? I have heard some say it will put out a KW or so...but I think
>that
>would require a bigger power supply, and if sooo, might as well leave it
>alone or buy an AL-572. I'm just curious.
>
>Thanks,
>Daniel N9WX
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|