Adrian,
My emails to you keep bouncing. Do you have a valid address.
Doug
Adrian Rees (M1LCR) wrote:
> I'd just like to add my bit to this thread...
>
> I have a Dentron ML2500B, and a Dentron ML2500 (yes two of the things).
>
> I use an Icom 756PROII and the ML2500B during contests, and have had
> continuous problems tuning the Dentron. So much so, I now have a Daiwa Auto
> ATU (Circa 1984) between the output of the Rig and the Input of the Amp,
> just so I can get the Amp to tune up properly...as well as the on board 756
> tuner. I've seen all sorts of crazy situations were as we tune the ATU
> (Aerial side, Amp Output) the input goes high SWR....the Power drops etc
> etc. Sometimes it can take 10minutes or so to tune the thing up !
>
> If anyone has a suitable input circuit that can be added to the Dentron, I
> for one would be very interested.
>
> (Incidentially I have a few spare 8875's ~ New Old Stock,Boxed Eimac if
> anyone is interested.)
>
> Adrian (M1LCR)
--
Doug Renwick VA5DX
PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0
VE5RA@sasktel.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|