Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] WTD: MOUNTING HARDWARE FOR 2 VACUUM VARIABLES

from [k0dan] [Permanent Link][Original]
Subject: [Amps] WTD: MOUNTING HARDWARE FOR 2 VACUUM VARIABLES
From: "k0dan" <k0dan@comcast.net>
Date: Thu, 7 Apr 2005 21:36:26 -0500
List-post: <mailto:amps@contesting.com> 
Need moutning/electrical hardware for mounting two vacuum variables.

Each has approx 2" ring on the tip, and approx. 3" ring in the center.

What have you?

Thanks and 73

Dan
K0DAN
k0dan@arrl.net


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] a common topic here tspa, R . Measures
Next by Date:  [Amps] stray capacitance pi network, John Irwin
Previous by Thread:  Re: [Amps] a common topic here tspa, Richard Measures
Next by Thread:  Re: [Amps] a common topic here tspa, Joe Subich, K4IK
Indexes:  [Date] [Thread] [Top] [All Lists]