Re: [Amps] Hot Chasis Problem

["Sam" <w4oae@comcast.net>]

Your hot chassis could just be a phantom voltage reading.  IE there isn't any 
real current potential between the B- and chassis ground.  Due to the very high 
impedance of the probe it shows a voltage potential due to the internal 
resistance of the probe being so high.  Try shunting the HV probe with a few 
megs of resistance and see what happens.  

W4OAE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps