Amps
[Top] [All Lists]

[Amps] KWS-1 Question

To: <amps@contesting.com>
Subject: [Amps] KWS-1 Question
From: "Dave Meitzen" <dmeitzen@comcast.net>
Date: Mon, 16 May 2005 17:10:58 -0500
List-post: <mailto:amps@contesting.com>
I have come in to ownership of a KWS-1 that has been modified to remove the
High voltage rectifiers and replaced them with a very large bridge rectifier
(really dumb when SS tube replacements are available). May not be a bridge -
could be a dual diode pack (but large) The HV filament xfmr and the HV tubes
have been removed. Has anyone seen a write up on this set up?

My ideal would be to recover these parts and bring the unit back to
original. The parts I need are the HV tube socket assemblies and the
transformer. The transformer is for cosmetics only.

I am also looking for a keylock to fit the puppy.

I'll be happy to pay or trade for any of this stuff.

Thanks for taking the time.
Dave

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] YD1381, Joe Francalanza
    • [Amps] KWS-1 Question, Dave Meitzen <=