Maybe Rudi from Emtron went to Dayton and is not back in Sydney yet to
answer any emails.
73, Alek
VK6APK
At 10:03 AM 25/05/2005, Steve (KT0DX) wrote:
>I have found it necessary to change the tube in my Emtron DX2SP amp but
>the operating manual states that if a new tube is insalled that a bias
>adjustment is necessary. The problem is that the manual does not
>provide any information on how to do this adjustment. I have sent
>Emtron an E-mail requesting the information but as of yet have not
>received any reply.
>
>Any information from anyone who has replaced this tube would be appreciated.
>
>Steve
>KT0DX
>kt0dx@earthlink.net
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/vk6apk
http://profiles.yahoo.com/vk6apk
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|