Most automotive paint is catalized and will certainally cure at ambient
temperature. The shops generally use a forced drying system to get the job
done faster...I`m certain of this having worked in the collision industry
for over 40 yrs..Jim.
----- Original Message -----
From: "Steve Katz" <stevek@jmr.com>
To: "'Gary Smith'" <wa6fgi@sbcglobal.net>; "Kenneth Grimm"
<kgrimm@adelphia.net>; "AMPS" <amps@contesting.com>
Sent: Wednesday, May 25, 2005 1:36 PM
Subject: Re: [Amps] [BULK] - Re: Alpha 78
> Remember auto body paint doesn't cure at room temperature. It's baked on.
> High-temp curing finishes don't *ever* fully dry without heat applied.
>
> For air-dry paint, I use Cardinal almost exclusively, since they can match
> anything to a tiny sample, guarantee results, are reasonably priced, and
> will provide single spray can lots to order.
>
> http://www.cardinalpaint.com/index2.html
>
> Cardinal is likely the leading provider of liquid and powder coat finishes
> to the electronics industry. (I have nothing to do with them, just a
> customer.)
>
> WB2WIK/6
>
> -----Original Message-----
> From: Gary Smith [mailto:wa6fgi@sbcglobal.net]
> Sent: Wednesday, May 25, 2005 1:29 PM
> To: Kenneth Grimm; AMPS
> Subject: [BULK] - Re: [Amps] Alpha 78
>
>
> Go to any auto body paint supply store. Most of them are able to computer
> color match the color of whatever it is (in the case your Alpha 78 front
> panel) you bring to them.
> 73,
> Gary... wa6fgi
>
> ----- Original Message -----
> From: Kenneth Grimm
> To: AMPS
> Sent: Wednesday, May 25, 2005 12:54 PM
> Subject: [Amps] Alpha 78
>
>
> I have a new front panel installed on a Alpha 78 that I recently
> acquired, but the cabinet is still a grungy, sticky mess. Naturally I
> would like to strip and paint it. Alpha suggest that I take the old
> cover to a body shop and have it matched, but I'm afraid it may be too
> messed up to ever get an accurate match. The sticky paint has acquired
> so much dust and grime over the years, I can't get a good match off of
> it. Has anyone tackled this problem and happen to have a paint formula
> handy? A Krylon or other canned paint number would be even greater.
:-)
> 73,
>
> --
>
> Ken K4XL
> k4xl@arrl.net
>
> *** BoatAnchor Manual Archive ***
> On the web at http://bama.sbc.edu and http://bama.edebris.com
> FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|