Amps
[Top] [All Lists]

[Amps] Low-ESR, High Ripple-I, 105ºC Electrolytics

To: AMPS <amps@contesting.com>
Subject: [Amps] Low-ESR, High Ripple-I, 105ºC Electrolytics
From: R.Measures <r@somis.org>
Date: Tue, 28 Jun 2005 09:44:56 -0700
List-post: <mailto:amps@contesting.com>
Parasitic Suppressor Retrofit Kits now stocks  Matsushita TSED 
long-life electrolytic filter capacitors.  The ratings:  105ºC, 
3.50A-rms ripple, 560uF, 450WVDC, 35mm dia, x 63mm. (fits in SB-220 HV 
filter capacitor holder), p/n 95, $10.93 each.  These capacitors are 
best mounted with silicone rubber adhesive on an insulating sheet as 
per:
http://www.somis.org/pb3_pic17.jpg
- note - The plastic insulating sheet under the caps in the photo is 
0.125" ABS.


Richard L. Measures, AG6K, 805.386.3734.  www.somis.org 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Low-ESR, High Ripple-I, 105ºC Electrolytics, R . Measures <=