I own a DEO QSK-1500 and a previous owner wired a bulb in series with the
fuse. When the QSK-1500 is presented with a SWR higher than what it wants
to see the bulb begins to glow. The bulb is mounted on top of the unit so
it is easy to see. I believe the bulb is a #47.
Can these guys be popping fuses because the QSK switch doesn't see a match?
73..de John/K4WJ
At 01:49 PM 07/14/2005, you wrote:
>ke6cvh@yahoo.com wrote:
>
> > I blew the PIN diode fuse.
>
>This is strange. I had an 86 for a couple of years, used it a lot --
>always full QSK at at least 1300 watts output on all bands, and NEVER
>blew the fuse. Yet some guys have continual problems with this.
>Something is going on that isn't clear to me.
>
>--
>73,
>Vic, K2VCO
>Fresno CA
>http://www.qsl.net/k2vco
John and Susan Bohnovic
(954) 432-1467 voice
(954) 431-7751 fax/data
curlhead@bellsouth.net (she)
bohnovic@bellsouth.net (he)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|