[Amps] Simple question

[StephenTetorka@cs.com]

Hi guys:

I have a vintage filament xmfr.

Voltages are a little high without load...and making allowance for 120 in 
place of 110 ...and there is evidence of repair and sign of past leaking resin.

What the 'recommended' way to work up a full load - 10 Amps - to see if this 
bugger can handle it?

Tnx,
Steve
WA2TAK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps