Will
I hope I didn't imply that I was replacing sockets. I am only
replacing the triodes in the sockets. The chimneys are, however
different between the 3-400 and 3-500 versions, due to the increased
height of the 500. Also the plate cap/heat radiator is integral on
the 400 and a separate larger device on the 500.
73
John
K5PRO
>Message: 3
>Date: Sat, 01 Oct 2005 19:28:19 -0400
>From: "Will Matney" <craxd1@verizon.net>
>Subject: Re: [Amps] the last story on why need 3-500Z
>To: amps@contesting.com
>Message-ID: <200510011928190810.0F6D63E2@outgoing.verizon.net>
>Content-Type: text/plain; charset=us-ascii
>
>John,
>
>I didn't think it would be much of a change but is the sockets
>different between the two, I always thought they were the same?
>That's what has me thrown, why would you need to change the sockets?
>
>Best,
>
>Will
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|