I really don't know if the tube is alright, I don't have a replacement
here at hand to test it out.
I hope it is as it costs over 800 bucks, Hi !
73 Jose CT1EEB
----- Original Message -----
From: "Wilson Smith" <wsmithfl@bellsouth.net>
To: <amps@contesting.com>
Sent: Wednesday, October 05, 2005 6:01 PM
Subject: Re: [Amps] Ameritron AL-1500 Problem (Mike Schatzberg)
> How do you know the tube is good. I had the same problem last week
> with a 3-500, i.e. intermitency, high input VSWR, full power when it]
> worked, etc.
>
> In my case, an intermitten grid to filament short was the culprit.
>
> Wilson/W7GAM
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|