almacottage wrote:
> hi .
>
> the sb200 will run on 12m from the 10m bandswitch position and on 17m in the
> 15m position .
>
> power may be slightly less than on the bands selected but will still be over
> 600w with 90w drive .
>
90W drive is too much for a SB-200. Great chance you will make splatter.
>
> 30m is a bit iffy if you try tuning it in the 40m section , i did try once
> but the amp took off on its own , so hence i decided it was no go on 30m .
>
> obviously youll need to readjust plate and load tuning from theyre respective
> 10m and 15m settings in order to run the 2 warc bands .
>
> 73 , ian m0bcg
>
73 Jim
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|