Rob & Terri Sherwood wrote:
> Anyone know a formula for calculating the voltage at the feed point of a
> vertical if you know the resistive and reactive values and the power?
> Example: 160 meter inverted L, R = 80 ohms, X = +420j & P = 1500
> watts. 73, Rob, NC0B.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
Just as a check, I ran the numbers through Dean Straw's TLW3 program.
With a low-pass L matching network using a series inductor of 28.6 uH
and a Q of 300, a 458 pf shunt cap from antenna base to ground it shows
a voltage of 1820 volts RMS or 2573 volts peak and a tuner loss of .15
db.
73, Roger
--
Remember the USS Liberty (AGTR-5)
http://ussliberty.org/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|