Amps
[Top] [All Lists]

Re: [Amps] 4K-Ultra Restoration

To: "Bob Maser" <bmaser@tampabay.rr.com>,"AMPS" <amps@contesting.com>
Subject: Re: [Amps] 4K-Ultra Restoration
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Reply-to: Gary Smith <wa6fgi@sbcglobal.net>
Date: Wed, 7 Dec 2005 15:17:41 -0800
List-post: <mailto:amps@contesting.com>
Hi Bob.
a suggestion for the decal dilemma: go to one of your local "zoomy" type car 
decorator label makers and have them dupe the decal.  I have done this and 
unless you tell someone you had it made locally, most cannot tell the 
difference.
73,
Gary... wa6fgi
  ----- Original Message ----- 
  From: Bob Maser 
  To: AMPS 
  Sent: Tuesday, December 06, 2005 8:00 PM
  Subject: [Amps] 4K-Ultra Restoration


  I am about 75% finished with the de-tarring part of this project.  As of 
  today these are my needs:

              230V blower. Henry replacement would be nice but something 
  quieter would be tempting.

              Filter Cap ±15ufd @ 5KV  Size is a constraint

              HV wire.  The HV wiring in this amp is really ratty looking.  I 
  want to replace it all.  Where can I buy?

              Here's a real stretch.  Since the Henry decal on the front panel 
  is partially missing,  are there any spare panels out there?

  Working on this amp has been great fun.  Getting it back together will be a 
  challenge.

  Bob Maser  W6TR

  _______________________________________________
  Amps mailing list
  Amps@contesting.com
  http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>