Amps
[Top] [All Lists]

Re: [Amps] Tek 100 MHz scopes

To: "Keith Dutson" <kdutson@sbcglobal.net>, <amps@contesting.com>
Subject: Re: [Amps] Tek 100 MHz scopes
From: Bill Turner <dezrat@copper.net>
Date: Fri, 24 Feb 2006 10:01:19 -0800
List-post: <mailto:amps@contesting.com>
ORIGINAL MESSAGE:

At 09:13 AM 2/24/2006, Keith Dutson wrote:
>I bought one like this a few years ago for $500 that was freshly calibrated
>and had the cover and manual.  These units will likely need to be
>calibrated, so one should consider that extra cost.
>
>73, Keith NM5G

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As one who has calibrated literally thousands of Tek 465 series 
scopes, it isn't that hard unless you want to tailor the bandwidth to 
an exact spec. If you are satisfied with "about" 100 MHz, the other 
adjustments are easy. Just follow the manual.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>