On Apr 27, 2006, at 11:40 AM, Ronald, Douglas S wrote:
> Amps fans,
>
> I have only subscribed to this reflector for a few months, however I
> have never seen any discussion on negative feedback in linears to
> reduce
> distortion. I plan on feeding a few pf's from the 4CX10000D plate back
> to the driver cathodes in a capacative voltage divider configuration.
This should make it possible to secure output at some frequency in the
VHF range without the need for a driver.
> (why a 4CX1000D?, because I have 4 of them with sockets) This topology
> should be frequency independent. I'm planning on a neutralized class A
> amplifier, and from10 to 20 dB of feedback. I wonder if anyone has
> successfully done this, and why it isn't done more frequently?
Because the need for oscillators is not frequent these days.
> There
> must be a can-of-worms here I'm not aware of...
With a 4cx10,000D, large worms.
>
> Thanks all,
> Doug Ronald
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Rich Measures, 805.386.3734, AG6K, www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|