Amps
[Top] [All Lists]

[Amps] Homebrewers info

To: amps@contesting.com
Subject: [Amps] Homebrewers info
From: "Will Matney" <craxd1@verizon.net>
Reply-to: craxd1@verizon.net
Date: Tue, 09 May 2006 10:57:51 -0400
List-post: <mailto:amps@contesting.com>
All,

I recently received a catalog from Aircraft Spruce & Specialty Co. and wanted 
to let you all know what they had to use for homebrewing amp projects. They 
carry aluminum sheet, angle, steel, plastics rod / sheet, micarda, special 
screws / nuts, rivet nuts, rivet nut tooling, pop rivets, tooling for them, 
paints, chemicals (like MEK), etc, etc.. Not bad prices either! You can order 
their catalog which is about 2 inches thick. They have stores in Ga, and in CA. 
Some stuff can be seen at their website. They have those clip type tinnerman 
nuts there if you don't want to use rivet nuts. Heathkit used these a lot.

Aircraft Spruce & Specialty Co.;

http://www.aircraftspruce.com/main.php

Best,

Will

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Homebrewers info, Will Matney <=