Amps
[Top] [All Lists]

Re: [Amps] More LK500

To: "'Jeff Strailey'" <liveccam@yahoo.com>,"'Amps'" <amps@contesting.com>
Subject: Re: [Amps] More LK500
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Mon, 29 May 2006 17:51:58 -0400
List-post: <mailto:amps@contesting.com>
Jeff, 

Compare your step start (soft start) unit to the one by 
Harbach Electronics (www.harbachelectronics.com).  Those 
instructions may help you get by (including the note that 
it is necessary to use different resistors on 120 volts!). 

The generic "manual" is: 
  http://www.harbachelectronics.com/pdffiles/ss-100.pdf
  

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: amps-bounces@contesting.com 
> [mailto:amps-bounces@contesting.com] On Behalf Of Jeff Strailey
> Sent: Monday, May 29, 2006 2:12 AM
> To: Amps@contesting.com
> Subject: [Amps] More LK500
> 
> 
> My problem with operating an LK500 following the change to 
> 120 Vac operation appears to be related to a step start mod 
> that was added at some time to the amplifier.  Perhaps 
> someone has a schematic or other information regarding a step 
> start mod kit that was sold at some time for the LK500.  It 
> is tempting to simply remove it and restore the AC input side 
> of the amplifier to it's original state but step start is 
> desirable if it can be made to work. 
>    
>   Jeff K6TLA
> 
>               
> ---------------------------------
> New Yahoo! Messenger with Voice. Call regular phones from 
> your PC and save big.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>