| To: | Pete Smith <n4zr@contesting.com>, amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] copper strap |
| From: | Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk> |
| Reply-to: | g3rzp@g3rzp.wanadoo.co.uk |
| Date: | Thu, 8 Jun 2006 15:58:41 +0200 (CEST) |
| List-post: | <mailto:amps@contesting.com> |
If the stuff isn't nice and flexible, it can be useful to anneal it. Get it red hot, and let it cool - usually, dropped into cold water, to save time. Then clean it up with steel wool. If you're using tube, be careful with cold water, as it can shoot up the tube, coming out as flash steam, and cause injury. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] 4-1000A Input matching, Bob Maser |
|---|---|
| Next by Date: | Re: [Amps] RCA 8122 Tubes, R L Measures |
| Previous by Thread: | [Amps] copper strap, Pete Smith |
| Next by Thread: | [Amps] SELL: 210uFd/450VDC Electrolytics, w2cqm@juno.com |
| Indexes: | [Date] [Thread] [Top] [All Lists] |