Amps
[Top] [All Lists]

[Amps] Problem with AL-811

To: "Amps list" <amps@contesting.com>
Subject: [Amps] Problem with AL-811
From: "Glenn HessJr." <glennhess@earthlink.net>
Reply-to: glennhess@earthlink.net
Date: Sun, 25 Jun 2006 21:48:51 -0400
List-post: <mailto:amps@contesting.com>
To all,

I am having a problem with my AL-811.  I cannot get more than 150 watts out
of the amp before the grid current exceeds 150mA.  I had a tube go bad the
2nd to last time I used the amp, so I replaced all the tubes. Now something
is a miss.  All the tubes are lit. 

The driver is a Ten Tec Jupiter.  I am not using the amp alc circuit, just
adjusting the transceiver output power.

Any guidance is much appreciated.  


Glenn HessJr.
glennhess@earthlink.net
EarthLink Revolves Around You.


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>