Might ought to mention that Radio Switch is now named Multi Tech industries.
Their link is below;
http://multi-tech-industries.com/
http://multi-tech-industries.com/rotary_switches.htm
Best,
Will
*********** REPLY SEPARATOR ***********
On 6/30/06 at 10:17 AM Tom W8JI wrote:
>Measured voltages breakdown of sample switches:
>
>Centralab JV-9000 series single pole
>
>contact to rotor 8.5kV
>contact to contact 6 kV
>rotor to shaft 7.5kV
>
>Progressively shorting Centralab:
>
>contact to rotor 9.5kV
>contact to contact 7kV
>rotor to shaft 4.4kV
>
>RSC Model 80
>
>contact to rotor 8.5 kV
>contact to contact 10kV
>rotor to shaft 5.5kV
>
>The most troublesome breakdown voltage in an amplifier is
>contact to rotor breakdown. That's always the highest
>voltage on any band. The lowest circuit voltage is rotor to
>shaft. Maximum contact-to-contact is generally around half
>the value of contact-to-rotor voltage.
>
>73 Tom
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|