Amps
[Top] [All Lists]

Re: [Amps] Safety grounding - was Mains Isolation Transformer

To: Gudguyham@aol.com
Subject: Re: [Amps] Safety grounding - was Mains Isolation Transformer
From: R L Measures <r@somis.org>
Date: Mon, 3 Jul 2006 13:37:35 -0700
List-post: <mailto:amps@contesting.com>
On Jul 3, 2006, at 1:12 PM, Gudguyham@aol.com wrote:

> In a message dated 7/3/2006 10:08:08 A.M. Eastern Standard Time,  
> r@somis.org writes:
> As I see it, under a volt is not a bane, and requiring two conductors
> in a 240v circuit that carry zero current is inane..
> Who said that?  In a 240V circuit (only 240v) You are required to  
> have 2 hot wires and a bond wire.  Or as you may know it, A black  
> wire, red wire, and a green wire.  If the icircuit is to be what  
> they consider 240/120 the you need a white wire.  But for a pure  
> 240 volt circuit you only need the 2 hots and a bond. NO neutral is  
> required;.   SO what is insane??

4-wire 240v circuits.

> Lou

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>