Amps
[Top] [All Lists]

Re: [Amps] Advanced Power Technologies ARF1505

To: "'mike kendall'" <ke6cvh@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] Advanced Power Technologies ARF1505
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Wed, 5 Jul 2006 13:06:15 -0400
List-post: <mailto:amps@contesting.com>
Mike, 

Contact Dick Frey, K4XU.  Dick is Manager of RF Products at APT. 

I believe the ARF1505 is the subject of an article in QEX (July?), 
is being used in a Tokyo High Power Labs amplifier and "may" 
be available in a package similar to those from CCI (board, etc.) 
at some point. 

Dick referred to the transistor as "the modern 3-500Z"

73, 

   ... Joe, W4TV 
 

> -----Original Message-----
> From: amps-bounces@contesting.com 
> [mailto:amps-bounces@contesting.com] On Behalf Of mike kendall
> Sent: Wednesday, July 05, 2006 11:45 AM
> To: amps@contesting.com
> Subject: [Amps] Advanced Power Technologies ARF1505
> 
> 
> Hello,
>     I have been looking at the Advanced Power Technologies, 
> now owned by Microsemi, ARF1505 power MOSFET.  It does 
> 750watts power output and requires 300VDC.  They have app 
> notes and it claims to be easier to match than the 48vdc 
> supply Motorola devices.
>     Has anyone built one of these amps, a pair will get full 
> legal limit no sweat and may be better than the typical 
> MRF154 1KW amps.  They appear to be very reasonable.  The 
> news link on them from a few years back stated around $150 
> each in quantities of 100 units but I don't know how much in 
> smaller quantities.
>     This could possibly be a great topic for discussion and 
> an outstanding project.  They are supposed to use the same 
> copper heat spreader and aluminum heat sink that the Motorola 
> applications notes use and available from CCI (Communications 
> Concepts Incorporated).
>     The company also claims the power supply would be cheaper 
> to build because of no need for a DC to DC converter as used 
> in the 48VDC switching power supplies.
>     These FET's are used with the medical applications and HF 
> amplifiers.  They work class A-E up to 30mhz and have a 
> typical efficiency up to 75%
>     I emailed the company for more info. and am waiting for a 
> reply.  Comments/discussion?
>   73,
>   ETC(SW/AW) Mike Kendall USN

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>