Joe,
That's about right for the output on them. They were actually running them a
little conservatively.
Best,
Will
*********** REPLY SEPARATOR ***********
On 7/9/06 at 2:32 AM Joe Subich, W4TV wrote:
>Peter writes:
>
>> I have a seen a 2MHz marine radio over here that used 3 6LQ6
>> in the PA with about 600 volts on the plates: but that was
>> rated for 100 watts PEP out, and, I suspect, didn't push
>> things at all.
>
>The Drake TR-4CW used three 6JB6 sweep tubes with 650 volts on
>the plates ... rated for 300 W PEP input. If I recall correctly,
>it would do a bit better than that ... the T4XC transmitter had a
>pair of 6JB6 sweep tubes and it would do about 150+ watts output.
>
>
>73,
>
> ... Joe, W4TV
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|