Bill,
See below;
*********** REPLY SEPARATOR ***********
On 7/21/06 at 7:16 AM Bill Turner wrote:
>ORIGINAL MESSAGE:
>
>On Fri, 21 Jul 2006 02:30:16 -0400, Will wrote:
>
>
>>How can it collect electrons from the cathode and take a charge when the
>path back to the cathode is broken via a blown fuse between the grid and
>ground making an open circuit?
>
>------------ REPLY SEPARATOR ------------
>
>Stray electrons within the tube can attach themselves to the floating
>grid and develop a small charge, typically no more than a few volts.
>To prove this to yourself, set up a tube with only filament/heater
>voltage applied and measure the c-g voltage with a high impedance
>meter. You will be amazed.
No, I agree like I said in another post earlier that this could happen, and
equilibrium be obtained. What I cant see is the grid taking on any more charge
than this thus charging to some other higher potential.
>
>In the case of small receiving tubes, this charge can actually be used
>to bias the tube when operated class A, although this is not really
>good design because of variation between tubes. It's just an
>interesting experiment.
Correct, this would not at all be a good idea for bias.
>
>Bill, W6WRT
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
Best,
Will
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|