Amps
[Top] [All Lists]

Re: [Amps] AMPs without HV transformer(make correct and other)

To: Hsu <Jbenson@sohu.co>
Subject: Re: [Amps] AMPs without HV transformer(make correct and other)
From: "carl s." <carlseye@tampabay.rr.com>
Date: Tue, 25 Jul 2006 18:40:21 -0400
List-post: <mailto:amps@contesting.com>
   Hsu : I'd like to see this one , if only for the technical curiosity 
!!  Freq ? Band ? etc :
     carl / kz5ca

Hsu wrote:
>   I just built a "mini" amp, using 8*FU-50(same as Russian GU-50)in push-pull 
> GG, it without HV transformer,
>  I add two HV RF  transformers( using  HV and high temprature teflon wire  
> winded )at  in/out put   port to isolate the  HV.it seems work great.And very 
> cheap and light.But I have never find
>  any  commercial produts using simalr design, and few ham design and build   
> the amp like this.I don't know the reason.
>  Is it duo to safety problem?but I know many old clour TV set with "hot" 
> chassis to, and isolated HV with HV cermic capacitor .
>     73! Hsu
>   Maybe I can not say clearly, the HV supply is voltage-multiplying  circuit. 
> I think it is most inexpensive  and light HV PS unit.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>   

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>