On Jul 28, 2006, at 7:19 AM, Keith Dutson wrote:
> Last night during a weekly practice session with our ham club's small
> bluegrass band, one of the guys said he replaced the Amperex 3-500Z
> in his
> AL-80A. It was putting out about 400 watts CW. He replaced with a
> 3-500ZG
> from RF Parts and now gets 800 watts CW. I asked what he did with
> the weak
> tube and he went into the shack and gave it to me.
>
> Is there anything that can be done to rejuvenate the weak tube?
> Or, is it
> just worn out? I don't think it has ever arced over, and I can see no
> external marks on the plate. What happens to make a tube weak?
usually loss of emission, either from running too much filament V or
>20,000 hours at the right fil V.
>
> Thanks in advance for all advice.
>
> 73, Keith NM5G
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
R L MEASURES, AG6K. 805-386-3734
r@somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|