Hi Ian, I wonder if something like the ceramic former from an old electric
fire element would behave for you, or for a larger diameter some old
electric hairdriers had ceramic former too. Just random ideas, maybe useful
or not.
Regards David
> OK, here's a question: any recommendations for a coil former material
> that can withstand a bit of heat? The 80/160m tank coil in my amp gets
> quite warm during RTTY contesting - not hot enough to indicate a design
> problem, but even a moderate increase in temperature makes the
> fibreglass tubing former smell quite unpleasant.
>
>
>
> --
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|