Amps
[Top] [All Lists]

Re: [Amps] PEP power..

To: amps@contesting.com
Subject: Re: [Amps] PEP power..
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Mon, 16 Oct 2006 10:29:48 +0100
List-post: <mailto:amps@contesting.com>
Peter Chadwick wrote:
>Actually, the definition of PEP quoted by SM2EKM is the definition in 
>ITU-R Recommendation SM328. That definition has been around since the 
>1950's.

It is also how "PEP" is legally defined in the US and UK licences, and 
probably in many others.

Note that the word "peak" applies  to the modulation envelope - NOT the 
RF power! Your RF power is defined as the average over one complete RF 
cycle, so your PEP is simply the power of the largest RF cycle you ever 
transmit.

The audio modulating frequency is much lower  than the RF frequency, so 
a modulation "peak" will contain at least several hundred RF cycles, all 
at the same power level within a fraction of a percent. That gives a 
power meter plenty of time to make a measurement... but many so-called 
"peak reading" power meters still fail to grab the true peak level of 
the modulation.


-- 
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>