Re: [Amps] Grid Meter

[Gudguyham@aol.com]

In a message dated 11/19/2006 11:10:43 A.M. Eastern Standard Time,  
JMLTINC@aol.com writes:

My  problem is: when the amp is keyed (no drive) the grid meter slams forward 
 
against the peg. Does this with two tubes. Disconnect the filament leads  and 
it does not budge.




Check to see if your grid shunt resistor/s on the grid meter are  opened.  Lou
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps