In a message dated 11/25/2006 12:28:05 P.M. Eastern Standard Time,
w8ji@w8ji.com writes:
In a GG amp a negative grid meter swing is caused by a short
from the cathode to chassis ground. That can be a shorted
tube or anything on the cathode shorted to the chassis.
In an Sb-220, if the amp works fine and the only problem is negative going
grid meter, the .82 grid meter shunt is opened. If the amp does not operate
normally, then what Tom suggests is possible. Lou
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|