Sam, the Collins still has a collector's value. I would replace the parts
with as close to stock as possible to retain that.
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Gary Schafer
Sent: Wednesday, December 13, 2006 2:19 PM
To: 'Sam Effinger'; amps@contesting.com
Subject: Re: [Amps] 30L-1 filter caps
Rich Measures has the best deals on caps, resistors and diodes.
73
Gary K4FMX
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Sam Effinger
> Sent: Wednesday, December 13, 2006 11:33 AM
> To: amps@contesting.com
> Subject: [Amps] 30L-1 filter caps
>
> I have a 30L-1 that I have almost nothing invested in ...one of the filter
> caps is bad and one of the diodes is shorted..
>
> My question is
>
> ---- Should I buy the board with the filter caps and diodes already
> installed ? Who sells the best board ??
>
>
> ---- Should I buy the caps from Surplus Sales of Nebraska and use my own
> diodes ?
>
>
>
> ---- Maybe look in Mouser to see is they have the caps..will replace all
> caps and diodes
>
> ------ buy the keying mod from Harbauh for $25 to get rid of the -170
> volts on the keying line
>
>
> any other mods??
>
> Thanks for taking the time to read this and for any reply's
>
> Life is good..
>
> Sam K9SD
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|