I have been over hauling an old FL-2100B amp and found that the
meter shunt, R3 on the schematic, looked a little cooked and upon
examination noted that the windings were physically, if not
electrically, fused. I removed it and separated the turns. The
schematic does not identify the value of the shunt so I wonder if
anyone on the amps reflector might know what value it should be.
Perhaps some of you have been down this road same road?
VE6TI
gordon Hungerford
ve6ti@telus.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|