3X3 = 3CX3000A7, 4X5 = 4CX5000*, 4X1 = 4-1000A, 4X3 = 4CX3000A.
The correct Pronunciation is Three By Three.
Little tubes are referred to like "a couple three fives" 35 = 3-500Z's. But
mostly are ignored by the big tube crowd like they don't exist.
However it is acceptable when piling up stacks of smaller tubes to use
AMPLIFIER names as referencing the PILE. An SX refers to a pair of 8877.
Ah, those crafty yanks....
>From a previous lesson by the Professor, Pair of 4X1's = MOJO...
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Peter Chadwick
Sent: Friday, January 12, 2007 8:53 AM
To: John; amps@contesting.com
Subject: Re: [Amps] schamatis 160 meter amp using 3cx3000a7
What do you mean by "160m amp using the 3x3 "?
What is a "3x3"?
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|